Force- Descaler

Description

PRODUCT DESCRIPTION:

PH FORCE DESCALER is a high-potency, concentrated acidic formula engineered for the rapid removal of limescale and mineral deposits. Designed for professional kitchen environments, it restores the efficiency of dishwashers, boilers, and heating elements while brightening dull metal surfaces by stripping away oxide films.

PRODUCT BENEFIT:

• Ultra-Concentrated: Maximizes economy in use and reduces storage footprint.

• Multi-Surface Safe: Suitable for stainless steel and most kitchen materials.

• Rapid-Action: Fast dissolution of inorganic scale and mineral buildup.

• Hygiene Secure: Removing scale eliminates hiding spots for bacteria, improving overall food safety

• Oxide-Strip: Actively brightens and restores dull metal finishes.

• Material Caution: Treat copper, brass, or aluminum with care; use short contact times only

INSTRUCTIONS FOR USE:

1. Soaking (Utensils & Small Items)

• Dilute: Mix 50–200 ml per litre of hot water (5–20% solution) based on scale levels.

• Apply: Fill or fully submerge the item in the solution.

• Action: Soak until scale dissolves.

• scrub heavy deposits if necessary.

• Finish: Rinse thoroughly with clean water and dry.

2. Spray Cleaning (Large Surfaces)

• Dilute: Mix 50 ml per litre of warm water (5% solution).

• Apply: Spray evenly onto the surface

• leave for at least 30 minutes.

• Action: Brush stubborn areas to loosen deposits.

• Finish: Rinse well and air dry.

3. Dishwashing Machines

• Prep: Turn off chemical dosing and fill the machine with fresh water.

• Dose: Add 10–30 ml per litre of water (1–3% solution).

• Run: Circulate for 10–15 minutes, then drain and inspect.

• Reset: Repeat if needed; otherwise, rinse thoroughly and leave doors open to dry.

• Final: Reactivate the dosing system.

CONTAINS:

• Phosphoric Acid 30% < 60%

Hazards & Technical Specifications

• Hazard Warning: CORROSIVE 8 (Diamond Symbol)

• QR Code: SCAN FOR SDS

• BATCH NO: [Blank]

• Product Code: PH:FDC